2.14.1 05.12.2022
- Fixed an error reading vendor name when crating new devices.
- Added lates DeviceOptions.ini (2022-10-19) in setup.

2.14.0 10.01.2022
- Added latest DeviceOptions.ini in setup.
- Implemented PaperSource+ option.

2.13.0 19.02.2020
- Implemented new option in [Settings] section in the PrinterExplorer.ini
  to let new devices be published in the windows directory. (SetPublished=0/1)

2.12.0 31.01.2020
- Implemented possibility to add a fix domain suffix to queuenames in the
  PrinterExplorer.ini section [VW]: AddDomainSuffix=

2.11.2 22.11.2019
- Fixed an error reading DeviceOptions.ini since 2.11.1

2.11.1 21.11.2019
- Fixed recognition of Gen 3 III devices.
- Added latest DeviceOptions.ini to Setup.

2.11.0 15.10.2019
- Implemented AsyncOnlineChecks for ICMP online checks instead of SNMP broadcasts.
- Build internal SNMP calls for SNMPv1. No need for GetStatusDLL anymore.
- Implemented SNMPv3 support for all SNMP requests.
  .Net Framework 4.0 (at least client package) is now needed before installation.

2.10.5 25.09.2019
- Fixed detection of Canon Gen 3 III devices.

2.10.4 25.07.2019
- Optimized DNS name resolution.

2.10.3 25.07.2019
- Enhanced logging for requesting online state.

2.10.2 28.05.2019
- Added logging for program start with parameters and Black- and Whitelist files.

2.10.1 18.03.2019
- Extended maximum Black- and Whitelist size to 10.000 entries.

2.10.0 26.03.2019
- Added a new whitelist SDS bulk change menu command for testing purposes.
- Fixed reading CSV files with empty lines.
- Added support for CSV files with a ',' as delimiter. This was needed systems having
  english number format switched on.
- Fixed setting finisher and tray options with the Plus drivers in LBP or compatible
  mode.
- Decreased wait time when a host name could not be resolved agains the DNS. There are
  no more repeats now if the first request fails until the device is selected again.
- Prevented the Default Settings to show up more than once per name.
- Auto reading the Device List after queue creation from file now.
- Allowing emtpy server name in csv file for queue creation now. The first server in the
  server list will be taken.
- Preventing duplicate devices in manual queue creation or queue creation from file now.

2.9.6 19.03.2019
- Fixed writing DeviceOptions on Plus Drivers.
- Implemented latest Default Settings and Plus Driver Base Files.
- Added option to set a fixed PortHostAddress for the printer port creation.

2.9.5 08.03.2019
- Implemented latest Default Settings and Plus Driver Base Files.
- Added support for Generic PCL Plus v1.5.1 and Generic Plus PS v1.2.0 only.

2.9.4 15.02.2019
- Implemented backup and restore for Sharename, Comment and Location when
  writing the base configuration on Plus drivers.
- Implemented detection of ADV edition devices (e.g. iR-ADV 4525 II) when
  setting device options.

2.9.3 13.02.2019
- Added new PlusDriver Base Files including the VW DefaultSettings.

2.9.2 12.02.2019
- Added detection of pull-printing queues in queue creation.
- Implemented reconfiguration for offline Plus Drivers in Write Device Options.
- Added latest DefaultSettings in Setup.

2.9.1 07.02.2019
- Added latest DefaultSettings in Setup.

2.9.0 05.02.2019
- Added support for GenericPlus Drivers in Mode Compatible for pull-printing queues and
  Lexmark devices.
- Added detection of pull-printing queues for setting DeviceOptions.
- Added new devices to support.
- Extended logging.
- Added driver mode detection for Generic Plus drivers.
- Fixed writing DeviceOptions to Generic Plus Drivers in all modes.
- Added driver mode subtypes for writing Default Settings to Generic Plus drivers.

2.8.1 07.11.2018
- Fixed GenericTypeDetection for applying default settings in bulk mode.
- Fixed applying DeviceOptions to Generic Plus drivers in bulk mode.
- Fixed detection of LBP devices with 'x' in name.
- Extented logging.

2.8.0 24.09.2018
- Implemeted all now used VW default settings.
- This version is also compatible with Windows Server 2016.
- Fixed creation of Generic Plus Plus drivers.

2.7.3 19.06.2018
- Implemented writing bulk default settings to all generic drivers.

2.7.2 16.06.2018
- Fixed writing Default Settings to PSDriver2, PlusDriver and PCL3Driver devices.

2.7.1 10.04.2018
- Fixed LBP Settings DeviceOptions.ini
- Fixed Writing Options to Generic Plus Drivers. Some default values were not set.

2.7.0 16.02.2018
- Fixed backup and restore of Full-Driver Backups with the Generic Plus Driver.

2.6.0 03.11.2017
- Added support for the Canon Generic Plus PS Driver.
- Fixed reading and writing PaperFeed Options with the Family PS Driver 2.

2.5.0 17.08.2017
- Added support for the Canon Generic Plus PCL6 Driver
- Added support for the Canon Family PS Driver v30.00

2.4.2 08.12.2016
- Added support for the Canon Generic PS3 Driver2 v3.0
- Added support for the Canon Family PS Driver v21.85
- Added support for the Canon Generic PCL 6 Driver v3.10
- Added support for iR-ADV C55xx Family driver.
- Added support for LBP 710Cx/712Cx Family driver.
- Added support for LBP 352x Family driver.
- Added default settings to InstallShield Setup
- Added devices to the DeviceOptions.ini

2.4.1 21.11.2016
- Added latest VW default Settings
- Added LBP352/LBP710C/LBP712C and iR-ADV C55xx devices to DeviceOptions.ini
- Fixed a bug restoring a single printer default settings on a queue with
  a different name.

2.4.0 21.07.2016
- Added support for the Canon Generic PCL6 v3.02 driver.
  To use it, a new entry in the PrinterExplorer.ini is necessary
  in the section [Settings]: UseGenericPCL6v3=1. You cannot use Generic PCL6 v2
  and v3 parallel on the same print server.   If you want to use Generic PCL6 v2
  you need to set UseGenericPCL6v3=0.
- Added new feature "FullDriverBackup" in the UI. All user settings,
  device options except queue name, port and sharing   will be backed up and
  can be restored.

2.3.2 30.03.2016
- Fixed a bug setting device options on Canon devices with no additional hardware.

2.3.1 02.03.2016
- Added latest VW Default Settings

2.3.0	02.03.2016
- Changed the data folder from the program directory to the system folder
  %allusersprofile%. The folder can be accessed through the file menu.
- Added adding write rights to the program data folder if not available by
  default and running as administrator.
- Fixed a bug when reading the device types on the Generic PS Driver2.
- Added support for Windows Server 2012R2

2.2.1	09.02.2016
- Implemented VirtualStore detection
- Fixed error message during writing default settings.

2.2.0	29.10.2015
- Added support for the Canon Generic PS3 Driver2
- Added support for the Lexmark Universal v2 XL driver for CX510 and MX610.
- Added default settings to InstallShield Setup
- Added devices to the DeviceOptions.ini

2.1.1 	14.04.2015
- Added support for iR-ADV C2225 Family driver.

2.1.0	15.12.2014
- Added new documentation 2.1.0
- New official release of the new DeviceOptions.ini structure

2.0.3b	30.09.2014
- Included the FamilyDriverDeviceOptions.ini in the DeviceOptions.ini file in an own
  section. The FamilyDriverDeviceOptions.ini is no longer needed.
- Lexmark devices does not need the country endings (e.g. "de") in their DeviceOptions.ini
  definitions any more.

2.0.2	02.07.2014
- Added support to write only the main device names for the iR-ADV models (e.g. iR-ADV C52)
  in the DeviceOptions.ini and the FamilyDriverDeviceOptions.ini file.

2.0.1	19.05.2014
- Added support for the iR-ADV 400/500

2.0.0	13.05.2014
- Added Support for Canon Family Driver (PS/PCL)
  Supported Devices are:
  - iR-ADV C22xx
  - iR-ADV 40xx
  - iR-ADV 42xx
  - iR-ADV C52xx
  - LBP6680
  - LBP7680
- Rebuild Default Settings Deployment